The TX-RZ830 brings a high-end approach to build and sound to the middle of our A/V receiver range. Our top-of-the-line high-current digital architecture is deployed with spectacular results: fluency, frequency range, transient response, and detail resolution are unassailable at the price. With sheer high-current power needed for edge-of-the-seat movie thrills and joyful stereo listening, the TX-RZ830 presents as a high-fidelity reference component loaded with connections needed for a custom install lasting well into the future.
THX Certified Select Theater-Reference Audio
THX Certified Select guarantees theater-reference sound in your home. To gain certification amplifiers must pass severe bench-tests covering every aspect of performance. THX Certified Select components suit rooms where screen-to-seat distance is about 10 ft. (3 m) and volume 2000 cubic feet (57 m3).
Dynamic Audio Amplification
The design philosophy behind Dynamic Audio Amplification places less emphasis on lab measurements and more on how the sound feels in real life. Unique high-current architecture and expert tuning deliver natural transient response the key to life-like sound. This deep reserve of power arrives instantly when action explodes on screen adding pure adrenaline to the film experience. Control is maintained with custom transformer and huge block capacitors non-phase-shift amp circuitry and discrete output transistors. Rated to drive nine four-ohm speakers simultaneously and with patented VLSC digital noise filtering (Front L/R) for source-faithful clarity DAA has muscle and sensitivity for emotionally compelling sound.
Dolby Atmos and DTS:X at Up to 7.2.4 Channels
Hear Dolby Atmos and DTS:X soundtracks through 7.2.2 or 5.2.4 channels. Connect an outboard power amp via 11.2-multichannel pre-outs for even more expansive 7.2.4-ch playback. Enjoy seamless top-to-bottom side-to-side and front-back coverage with in-ceiling speakers and floorstanding speakers. Individual sounds aren’t tied to channels and move around your audience.
Dolby and DTS Solutions for 3D Sound
DTS Neural:X technology and Dolby Surround find spatial cues in legacy soundtracks and upmix for playback through speaker systems with height channels. Cross-compatible with popular sound formats from Dolby and DTS you can enjoy seamless front-to-back side-to-side and floor-to-ceiling coverage with your existing DVD and Blu-ray Disc library or streaming service.
Chromecast Built-in Works with the Google Assistant
Stream any music from your smartphone laptop or PC to the receiver with ease. Control playback with Chromecast-enabled apps from your iPhone iPad Android phone or tablet Mac or Windows laptop or Chromebook. If you have a device with the Google Assistant built-in you can control music on the TX-RZ830 by voice.
Powered Sound in Three Zones
- THX-Certified select theater Reference power 120W Channel.
- Dolby Atmos and DTS: x playback through 5.2.4 or 7.2.2 channels with 11.2 multichannel
- HDMI 7 in (rear), main out, and Sub/zone 2 out supporting 4K/60 Hz, HDR10,
- Powered zone 2 and powered zone 3 speaker outputs,
- RZ build quality: dynamic Audio amplification with 5 hz-100 kHz frequency response,
Key Features
Main Unit
|
| Channels |
9.2 |
| Power Output per Channel |
120 W per channel (8 Ohms, 20 Hz to 20 kHz, 0.08% THD, 2-channels driven, FTC)
250 W per channel (6 Ohms, 1 kHz, 10% THD, 1-channel driven) |
| Dynamic Power per Channel |
130 W (8 Ohms, front)
220 W (4 Ohms, front)
250 W (3 Ohms, front) |
| THD & Noise |
0.08% (20 Hz to 20 kHz, half power) |
| Input Sensitivity and Impedance |
200 mV/47 kOhms (Line)
3.5 mV/47 kOhms (Phono MM) |
| RCA Output Level and Impedance |
Subwoofer Pre-Out, Rated: 1.0 V/470 Ohms
Zone Pre-Out, Rated: 1 V/2.3 kOhms
Zone Pre-/Line-Out, Rated: 1 V/200 mV/470 Ohms |
| Frequency Response |
5 Hz to 100 kHz / +1 dB, -3 dB (Direct Mode) |
| Tone Control |
Bass: ±10 dB, 20 Hz
Treble: ±10 dB, 20 kHz |
| Signal-to-Noise Ratio |
106 dB (line, IHF-A)
80 dB (phono, IHF-A) |
| Speaker Impedance |
4 to 16 Ohms |
Processing
|
| Dolby |
Dolby Atmos, Dolby TrueHD, Dolby Surround |
| DTS |
DTS:X, DTS-HD Master Audio, DTS Neural:X |
Video Section
|
| Input Sensitivity/Output Level and Impedance |
Component Y: 1.0 Vp-p/75 Ohms
Component B/R: 0.7 Vp-p/75 Ohms
Composite: 1.0 Vp-p/75 Ohms |
Tuner Section
|
| Tuning Frequency Range |
FM: 87.5 to 107.9 MHz
AM: 530 to 1710 kHz |
| FM/AM Preset Memory |
40 stations |
Connectivity
|
| Wi-Fi |
Dual-band 2.4 / 5 GHz |
| Bluetooth |
Version: 4.1 + LE
Profiles: A2DP v1.2, AVRCP v1.3 |
| AirPlay |
Yes |
| Inputs |
7 x HDMI (1 front)
2 x RCA component video
2 x RCA composite video
2 x optical TOSLINK
1 x digital coaxial
6 x stereo RCA
1 x stereo RCA phono with ground screw |
| Outputs |
2 x HDMI
1 x stereo RCA zone 2 pre-/line-out
1 x stereo RCA zone 3 / height 2 pre-/line-out
2 x subwoofer pre-out
1 x 1/4" / 6.35 mm headphone (front) |
| Other Interfaces |
1 x RJ45 Ethernet LAN
1 x 1/8" / 3.5 mm setup mic in (front)
1 x 1/8" / 3.5 mm IR in
1 x RS-232 in
1 x 1/8" / 3.5 mm 12 V trigger out
1 x AM antenna
1 x FM antenna
1 x USB 5 V / 1 A |
| Speaker Connectors |
11 x binding post pairs |
General
|
| Power Requirements |
120 VAC, 60 Hz |
| Power Consumption |
Typical: 870 W
On, No Sound: 70 W
Standby: 0.15 W |
| Dimensions (W x H x D) |
17.1 x 7.9 x 15.7" (435 x 201.5 x 398 mm) |
| Weight |
30.9 lb (14 kg) |
